Subsequent technology digital substation WAN

The Cisco Substation Automation answer allows utilities to assist new enterprise fashions, broaden capability, combine renewable vitality sources, cut back operational prices, cut back dangers to grid operations, and meet regulatory necessities. The answer helps extra than simply the core supervisory management and information acquisition (SCADA) techniques, including key use instances involving safety of key belongings and energy administration. Its expertise upgrades and community administration capabilities cut back operational prices by lowering the community footprint and automating key duties. The community infrastructure can assist extra gadgets and deal with extra bandwidth with extra resiliency and new capabilities for the community, resembling time synchronization and internet hosting purposes. The Substation Automation answer builds on the visibility and safety of our Grid Safety answer to fulfill the wants of a variety of transmission and distribution substations. The up to date answer helps utilities overcome the next enterprise and operational challenges:

• Rising variety of course of and station bus gadgets driving increased bandwidth necessities
• Restricted area and energy in substations for tools
• Want to scale back cybersecurity dangers by offering visibility into and segmentation of substation gadgets and visitors flows.
• Lack of networking abilities in grid operations groups
• Necessities to Combine and monitor legacy gadgets
• Regulatory necessities, particularly NERC-CIP and NIS2
• Must scale to assist extra substations

The Substation Automation answer helps utilities overcome these challenges and lays the muse for extra dependable, sustainable, environment friendly grid operations at a decrease price. Key options of this answer embrace:

• Extra ports and quicker speeds: Introduction of the IEC 61850-3 and IEEE 1613 compliant Cisco Catalyst IE9300 Rugged Collection Switches with 28 Gigabit Ethernet fiber ports for safe, dependable, low-latency station and course of bus communication
• Larger port density through stackable switching
• Larger reliability: Help for a variety of resiliency and synchronization protocols
• Multifunctional router: Introduction of IEC 61850-3 and IEEE 1613 substation licensed Cisco Catalyst IR8340 Rugged Collection Router and Cisco Catalyst IR1100 Rugged Collection Routers for a mixture of scalable WAN connectivity, firewall safety, and software internet hosting
• Reliability: Help for a variety of resiliency and synchronization protocols
• Larger safety: Allow extremely safe WAN with superior firewalling, URL filtering, intrusion prevention (IDS/IPS), malware safety, IPsec/MACsec encryption, and DNS safety. Implement community entry management utilizing Cisco Trustsec and IEEE 802.1x. Acquire visibility of substation belongings, their communication actions and your safety posture with Cisco Cyber Imaginative and prescient. Management distant entry into belongings with Cisco Safe Tools Entry. All constructed into Cisco networking tools which have safe boot, signed firmware, and SUDI.
• Flexibility: Extremely modular platforms to assist switching, routing, synchronization, and edge compute wants
• Availability: Help for IEC62439-3 lossless community topologies and protocols (resembling Excessive-Availability Seamless Redundancy [HSR] and Parallel Redundancy Protocol [PRP])
• Precision: Help for substation-wide time synchronization (for instance, the 2017 IEEE Precision Time Protocol – Energy Profile or IEC61850-9-3 PUP)
• Essential features: Help for substation communications resembling IEC 61850, Modbus, IEC 60870-5-104 (IEC 104) and Distributed Community Protocol 3 (DNP3)
• Simplicity: Vary of administration choices, together with Cisco Catalyst Middle for substation switching and Cisco SD-WAN Supervisor for SD-WAN routing capabilities

Evolution to section routing and Ethernet VPN (EVPN) for substation WAN connectivity

Previous to section routing, multi-protocol label switching (MPLS) packets had been forwarded utilizing label switching as an alternative of IP-based routing, which implies the routers forwarded visitors primarily based on the label and never the vacation spot handle. This required solely the “edge” routers to carry out an IP lookup, whereas intermediate “core” routers carried out solely a label lookup.

Sadly, MPLS didn’t take away complexity from an current community. The truth is, it added extra complexity by extra protocols and every MPLS node requiring the state to be synchronized throughout your complete community. As the scale of networks grew, so did the state and complexity, making it tougher to function and handle.

Phase routing depends on a small variety of extensions to Cisco Intermediate System-to-Intermediate System (IS-IS) and Open Shortest Path First (OSPF) protocols. It may well function with an MPLS or an IPv6 information aircraft, and it integrates with the wealthy multi service capabilities of MPLS, together with Layer 3 VPN (L3VPN), Digital Personal Wire Service (VPWS), Digital Personal LAN Service (VPLS), and EVPN.

Phase routing will be straight utilized to the MPLS architectures with no change within the forwarding aircraft. Phase routing makes use of the community bandwidth extra successfully than conventional MPLS networks and affords decrease latency.

EVPN

EVPN is the following technology L2VPN expertise, it offers layer-2 in addition to layer-3 VPN companies in a scalable and simplified method. The evolution of EVPN began because of the want of a scalable answer to bridge varied layer-2 domains and overcome the restrictions confronted by VPLS resembling scalability, multi-homing, and per-flow load balancing.

Use instances thought-about within the new Cisco Validated Designs

Now we have 3 classes of companies to contemplate for the transport community:

1. Layer 3 IP primarily based Substation to Datacenter: IP primarily based Scada information, IP primarily based CCTV, enterprise information and IP telephony.
2. Layer 2 Non routable Substation to Substation: Layer 2 ethernet primarily based multicast protocols (resembling IEC61850 GOOSE & SV), Digital machine migrations (for virtualised purposes) and third get together Scada visitors.
3. Layer 2 Substation to Substation for Conventional Teleprotection: Energy Safety companies, that are low latency level to level utilizing particular utility protocols and strict engineered paths throughout the community.

SEL Partnership

Cisco companions with Schweitzer Engineering Laboratories to offer the Teleprotection companies and interfaces inside the substation, that are through the SEL ICON platform. This platform offers the interfaces required for substation safety gadgets whereas offering an Ethernet primarily based uplink to the Cisco Converged Transport community (NCS). SEL experience in grid automation is coupled with Cisco’s Industrial substation and converged transport community merchandise offers a better of breed finish to finish answer.

Validated Designs

Datasheets

Share: