The iFlight Nazgul ECO is probably going one of the reasonably priced BNF (bind-and-fly) 5-inch FPV drones accessible in 2024. At solely $199.99, it competes with DarwinFPV’s funds mannequin, however the Nazgul ECO affords higher {hardware}, making it a compelling alternative for a lot of. We’re reaching a degree the place shopping for a prebuilt drone makes extra sense than constructing one from scratch, not solely as a result of it’s simpler but in addition as a result of it may be cheaper. Let’s discover out if the Nazgul ECO is the suitable alternative for you on this evaluate.
Study extra about FPV Drones on this newbie’s information: https://oscarliang.com/fpv-drone-guide/
The place to Purchase?
You will get the iFlight Nazgul ECO right here:
It comes with the next equipment.
Be aware that batteries will not be included. You will have some 6S LiPo batteries; I like to recommend 1100mAh, 1200mAh, and 1300mAh sizes: https://oscarliang.com/lipo-battery-guide/#5percentE2percent80percentB3-Freestyle-and-Racing-Drones
For spare propellers, get them right here:
Specs
- Flight Controller: BLITZ ATF435
- ESC: BLITZ E55S 4-IN-1 ESC
- VTX: BLITZ 1.6W
- VTX Antenna: Albatross V2
- Motors: XING E Professional 2207 1800KV
- Propellers: Nazgul F5
- Receiver: iFlight ExpressLRS 2.4GHz RX
Nazgul ECO = Cheaper Nazgul V3?
At first look, the iFlight Nazgul ECO seems to be virtually an identical to the favored Nazgul V3. It has the identical design, motors, body, and 3D-printed components. Even the LED emblem on the underside is identical. Nevertheless, the ECO is sort of $40 cheaper than the V3. How is that doable?
The ECO makes use of a brand new FC/ESC stack with the extra reasonably priced AT32 chip as an alternative of the STM32 F7. I imagine that is the primary cause why iFlight is ready to provide this drone at such a low value. As mentioned earlier than on this weblog, the AT32 chip helps to make FPV extra reasonably priced, and I feel we’re lastly seeing that development take maintain.
Curiously, the default craft title within the Betaflight OSD is “Nazgul V3”, which additional confirms my suspicion that the ECO is simply the V3 with a extra budget-friendly FC/ESC stack. They in all probability simply copied all of the config over and forgot to alter the craft title.
Nearer Have a look at iFlight Nazgul ECO
The iFlight Nazgul ECO has an extended physique, designed primarily for freestyle and cinematic flying.
It comes with a GoPro mount for straightforward set up on prime.
And the highest plate affords loads of room for a big LiPo battery.
The construct high quality is spectacular for a drone that solely prices $200, with ample area between parts for cooling. The design is straightforward and minimalist, specializing in efficiency with out pointless facet plates that add weight.
The Nazgul ECO features a buzzer, properly mounted within the entrance behind the digicam utilizing a 3D-printed holder, which is uncommon in RTF (ready-to-fly) quads, particularly on this low value vary.
The motors are Xing E Professional 2207 1800KV, the identical as these within the Nazgul V3. These are a number of the greatest funds motors accessible. The motor wires are protected with plastic tubes, which look tidy {and professional}. Whereas opinions differ on the effectiveness of those tubes in defending motor wires from prop strikes, they do add a clear look and solely weigh 2 to three grams.
The ECO options iFlight’s emblem with LED mild on the underside, just like the V3.
It comes with a robust 1.6W VTX, making it a doable candidate for long-range flying. This VTX can certainly ship the marketed 1.6W output energy, as examined right here: https://oscarliang.com/iflight-blitz-1600mw-vtx/
One distinction between the ECO and the V3 is the antenna. The ECO makes use of the most recent Albatross V2, which seems to be cool and has an appropriate SWR, as examined right here: https://oscarliang.com/fpv-antenna-swr/#iFlight-Albatross-V2.
Based mostly on my antenna and VTX testing, channel 1 is perhaps optimum for one of the best vary.
The FPV digicam is pretty uncovered to break in crashes. It will profit from extra safety from the entrance bumpers.
The flight controller stack makes use of AT32 chips that are supported in Betaflight 4.5. This flight controller affords 6 UARTs, with solely two getting used (for the receiver and VTX), leaving 4 spares.
Taking the Nazgul ECO aside is simple; simply take away the 8 screws on the highest plate.
I’m pleasantly shocked that it contains an Anti Spark Filter, eliminating the spark while you join the LiPo battery. Initially it was a bizarre feeling when plugging within the battery as a result of I might usually count on a spark, however it’s now fully silent which makes me surprise if the drone has a difficulty, till I hear the ESC initialization beeps. It’s such a pleasant contact!
Solder high quality seems top-notch.
Enhancements I Need to Make
The ExpressLRS receiver is related to the flight controller through a connector. The very first thing I’d do is take away the connector and solder the receiver on to the flight controller. I’ve had a few cases up to now the place related connector failed on me, inflicting random failsafe mid-flight. We don’t usually unplug the receiver, so it’s fairly pointless to have the connector, it’s simply asking for bother.
I’ll add my very own GPS to make use of Rescue Mode in Betaflight (just like return to residence). Though iFlight affords GPS as an possibility while you buy the drone, it prices $39 extra! I’m not certain what kind of premium GPS they’re utilizing, however it feels barely overpriced to me. If you’re not afraid of soldering and organising GPS, you might save fairly a bit of cash by doing it your self. I’ve a information explaining the best way to setup GPS and Rescue Mode: https://oscarliang.com/setup-gps-rescue-mode-betaflight/
The analog digicam “RACECAM” is mediocre. It’s flyable, however the subject of view is sort of small and the publicity modifications are fairly gradual when lighting situation modifications. I’d in all probability improve it to one thing higher just like the Ratel V2: https://oscarliang.com/fpv-camera/#Analog
In the event you want to enhance vary, you must take into account mounting the receiver antenna vertically as defined on this information: https://oscarliang.com/antenna-positioning/
The present sensor is manner off, and desires calibration.
The way to Setup
The included manuals don’t present a lot element, so I’ve included the method I went by means of to set it up earlier than my maiden flight.
To start with, connect the VTX antenna, battery pad, and battery strap, and get the propellers and nuts prepared for set up.
Binding Receiver
The handbook doesn’t specify the receiver machine goal, so I needed to discover out in WiFi mode. The receiver is the iFlight 2.4GHz RX, and it comes with ExpressLRS 3.3.0 firmware. I flashed the receiver with the most recent firmware, together with my bind phrase.
Study extra about binding ExpressLRS receiver right here: https://oscarliang.com/bind-expresslrs-receivers/
Betaflight Configuration
The iFlight Nazgul ECO runs Betaflight 4.5.0 out of the field, and the FC firmware goal is IFLIGHT_BLITZ_F435. You’ll find the default CLI Diff right here. Listed below are the configuration modifications I made:
- Preset: Apply the ExpressLRS Preset in line with your packet price.
- PID Tuning, Charge Profile Settings: Apply your individual charges.
- Modes: Assign switches to Arm, Angle, Beeper, and Flip Over After Crash.
Ultimate Ideas
I completely love the iFlight Nazgul and Evoque collection. They’ve been my go-to pre-built 5″ FPV drones, and now with the Nazgul ECO, it’s much more reasonably priced. It’s even cheaper than the “least expensive 5″ FPV drone components listing” I put collectively, very spectacular.
Some components of this drone may present indicators of a funds construct, such because the FPV digicam and lack of GPS, however many of the parts are stable with nice construct high quality, it’s onerous to beat the general worth of the Nazgul ECO.
In the event you don’t need to construct a drone from scratch and simply need to fly, you possibly can’t go improper with this FPV drone. To not point out it’s well-tuned out of the field. Simply slap a GoPro on this factor and you’re going to get some fairly superior footage.
You will get the iFlight Nazgul ECO right here: