The excitement round ExpressLRS Gemini Mode is plain, but there’s a scarcity of true variety receivers available on the market that help this superior characteristic. Enter the RadioMaster RP4TD – marking a major improve from its predecessor, the RP3, which solely provided antenna variety. Let’s dive in to see what it gives.
Study extra about ExpressLRS in our complete tutorial: https://oscarliang.com/setup-expresslrs-2-4ghz/
What’s Gemini Mode? https://oscarliang.com/expresslrs-gemini/
The place to Purchase?
Get the RP4TD Receiver from these distributors:
The package deal features a set of silicone wires for connecting to the flight controller, and three items of clear warmth shrink, enhancing the sturdiness of the setup.
Technical Specs
- MCU: ESP32
- RF Chip: Twin SX1281
- Antenna: Twin 65mm 2.4GHz T Antennas
- Frequency Vary: 2.4GHz
- Most Refresh Price: 500Hz / F1000Hz
- Telemetry RF Energy: Max 100mW (x2)
- Working Voltage: DC 4.5-12.0V
- Weight: 1.4g (excluding antennas)
- Dimensions: 23.7×16.3×4.0mm
- Pre-installed Firmware: ExpressLRS V3.3.0
- Firmware Goal: RadioMaster RP4TD 2400 RX
- Bus Interface: CRSF
- Lengthen Interface: UART
The standout characteristic of the RP4TD is its two separate SX1281 RF chips and TCXO (Temperature Compensated Crystal Oscillators). This design means the receiver is healthier geared up to deal with a variety of temperatures and difficult environments. With twin RF chips, the RP4TD gives two telemetry outputs at 100mW every, a major improve for lengthy vary flying. For these seeking to push the boundaries of two.4GHz FPV flying, this receiver looks like a perfect alternative.
Construct High quality
The receiver itself is compact and well-built.
The highest facet includes a boot button and two U.FL connectors for the antennas. The 4 soldering pads are accessible on each side of the receiver with clear labels: 5V, GND, RX and TX.
Though the RP4TD is notably bigger than single-antenna EP1 receivers attributable to its twin RF chains, the design stays impressively compact.
Nevertheless, the inclusion of longer antennas might have enhanced its attraction for bigger builds, resembling 7″ or 10″ drones. Nonetheless, prolonged antenna wires are available for these in want:
95mm / 120mm / 240mm antenna:
Set up
Putting in the RP4TD is as simple as any ExpressLRS receiver. The hot button is to make sure optimum antenna placement. To make sure one of the best reception, positioning the antennas to keep away from getting blocked simultaneous by any a part of the quadcopter is essential. This separation is significant for sustaining a constant and dependable connection.
Conclusion: Is the RP4TD Proper for You?
Be aware that true variety doesn’t crucial improve vary however meant to boosts reliability and hyperlink high quality, significantly with Gemini mode enabled.
The RadioMaster RP4TD Variety ELRS Receiver is a major improve for FPV pilots in search of the utmost in reliability and efficiency. Its dual-chip design and strong construct make it a best choice for demanding flight situations.
Get the RP4TD Receiver from these distributors:
For these constructing bigger drones, take into account getting some longer antennas for one of the best setup. For individuals who push their FPV flying to the extremes, the RP4TD is a worthy funding, making certain that your drone stays in fixed, dependable communication along with your transmitter.
95mm / 120mm / 240mm antenna: