We’ve been protecting cyberdeck tasks for a very long time now they usually are likely to get “samey.” However YARH.IO (But One other Raspberry Handheld) has a historical past of releasing attention-grabbing designs that all the time impress us. The latest challenge from YARH.IO, THEBRICK, isn’t any completely different.
We’ve got featured two YARH.IO builds prior to now: the unique YARH.IO MKI and the follow-up YARH.IO Micro 2. Each had been pocket computer systems constructed across the Raspberry Pi 3 Mannequin B+ with full tactile keyboards. However there was one YARH.IO challenge we missed: the Cyberdeck Keyboard. That may be a 4×12 or 5×12 compact ortholinear mechanical keyboard designed to be used in cyberdecks. THEBRICK is YARH.IO’s first cyberdeck design to benefit from that keyboard.
THEBRICK options the Cyberdeck Keyboard and a Raspberry Pi 4 Mannequin B single-board pc. THEBRICK has three primary sections: the primary unit (THEBRICK itself), the Cyberdeck Keyboard, and a service body that ties these two collectively. That is attention-grabbing, as a result of it helps many various carriers. For example, one service has folding hinge mechanisms so it may elevate the primary unit as much as a stage that’s simpler to see. One other service has a static design that appears a bit like an previous TRS-80 Mannequin 100 pc, with the display screen flat above the keyboard.
This uncommon design pressured YARH.IO to cram all the things apart from the keyboard into the primary unit. That incorporates the Raspberry Pi, a 400×1280 pixel 7.9” touchscreen from Waveshare, three 5000mAh Fenix ARB-L21-5000U batteries (every with an built-in charger), a small OLED standing display screen, a Pimoroni Tiny 2040 improvement board to manage that display screen, and extra. There may be even a heatsink and fan to maintain the Raspberry Pi good and funky. That’s rather a lot to suit into such a small area, however YARH.IO even offered wire guides to assist in cable administration and preserve all the things tidy.
The primary unit enclosure, keyboard enclosure, and carriers are all 3D-printable. Like YARH.IO’s different designs, they’ve a form of minimalist industrial aesthetic that reminds us of merchandise from the Nineteen Eighties. And, after all, these STL information can be found for obtain so you may print them and construct your personal THEBRICK.